Wood is a natural product, containing variations in color, decoration and grain. Before any Sabra International flooring product leaves our plant, it goes through numerous Inspections; as the Installer of the flooring YOU are the final inspector. Allow five (5) percent minimum for culling out (removing) undesirable pieces during the layout process. Some overwood/underwood and gaps are a natural occurrence In factory finished wood flooring. Small gaps can be filled with appropriate color match filler. All wood floor Installations must follow NWFA (National Wood Flooring Association) guidelines. DO NOT GLUE DOWN SOLID RANDOM LENGTH WOOD FLOORING. SOLID WOOD FLOORING MUST BE NAILED OR STAPLED DOWN OVER AN APPROPRIATE WOOD SUB-FLOOR AS PER NWFA GUIDELINES. Solid wood shorts and or parquets may be glued down using a waterless adhesive (urethane or solvent base). All solid wood flooring requires acclimation time BEFORE it is Installed. Check the moisture content (MC) of the flooring when It is delivered to the job site, and do not install until it reaches the desired Me for the climate and environment in which It Is going to be used; adjusted to the species of wood being Installed. For more Information about the MC required in your area for the species of wood you are using call our technical department or contact the National Wood Flooring Association. DO NOT remove flooring from cartons for acclimation, and do not install until it is at the correct MC.
NOTE: SABRA INTERNATIONAL ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY MATERIAL ONCE IT HAS BEEN INSTALLED. IF THERE IS ANY QUESTION REGARDING FIT, FINISH OR ANY OBVIOUS DEFECTS; DO NOT INSTALL! INSTALLATION ACKNOWLEDGES ACCEPTANCE OF THE MATERIAL.
INSTALLER: LEAVE THIS NOTICE WITH CONSUMER.
300 711T STREET, SUITE 430
MI.AMI BEACH, FL 33141
PHONE 305-868-3667 FAX 305-868-5447